Visit “Cutting Machine.com” if you want to know about the cutting work of the paper, resin, film, rubber, vinyl, glass fiber and so on.


 
 
 
Choice of paper
cutting machine
Inquiries
Inquiries are welcome. Contact us
by phone, by fax,
or by e-mail.
TEL:+81-568-67-5311
FAX:+81-568-68-0495
MAIL:info@itotec.co.jp




Wood
Wood paper for laminated plywood
Wood
The material is cork
Wood
CFN
Paper and
paper craft
Paper
Paper and
paper craft
Packing
Paper and
paper craft
Twisted paper string ornament
Paper and
paper craft
Hard press board
Felt
Wool felt
Felt
Saran rack filter
Felt
Cloth felt
Plastic
Plastic cardboard
Plastic
Polyester film
Plastic
Paulownia
Plastic
CFRP
Urethane
Urethane resin
Urethane
Urethane foam
Rubber
Rubber
Vinyl
Soft vinyl sheet
Glass fiber
Glass fiber mat
Metal
Metal deposition sheet
PS board
PS board mat
           
Honeycomb
Honeycomb
           
  Workpiece (material to be cut):Urethane foam
Cutting case, company M

Material to be cut: Urethane foam
Cutting machine: JAC-160CFC
【Key points of cutting】
Material and angle of cutting edge High-speed steel double-sided blade
Setting method Same as paper
Clamp (pressing method) Do not press when using a double-sided blade
Pressure 4KN
Angle at which the cutting edge is lowered Standard
Method of clamping the cut material Immediate release
Others Soft materials are cut even if they are about 20mm thick. With hard materials, surface resistance causes a problem. The double-sided blade knife may be used. To cope with inclination on the back side of the knife, retract the backgauge when cutting.



  Workpiece (material to be cut):Urethane resin
Cutting case, company O

Material to be cut: Urethane resin
Cutting machine: JAC-160CFC
【Key points of cutting】
Material and angle of cutting edge High-speed steel double-sided blade
Setting method Same as paper
Clamp (pressing method) Do not press
Pressure  
Angle at which the cutting edge is lowered Standard
Method of clamping the cut material Do not use
Others Soft materials are cut even if they are about 20mm thick. With hard materials, surface resistance causes a problem. The double-sided blade knife may be used. To cope with inclination on the back side of the knife, retract the backgauge when cutting.

 
   
© ITOTEC CO.,LTD. ALL RIGHTS RESERVED